Search for: All records

Unraveling mechanical properties from fundamentals is far from complete despite their vital role in determining applicability and longevity for a given material. Here, we perform a comprehensive study related to mechanical properties of 60 pure elements in bcc, fcc, hcp, and/or diamond structures by means of pure alias shear and pure tensile deformations via density functional theory (DFT) based calculations alongside a broad review of existing literature. The present data compilation enables a detailed correlation analysis of mechanical properties, focusing on DFT-based ideal shear and tensile strengths (τis and σit), stable and unstable stacking fault energies (γsf and γus), surface energy (γs), and vacancy activation energy (QV); and experimental hardness (HB), ultimate tensile strength (σUT), fracture toughness (KIc), and elongation (εEL). The present work examines models, identifies outliers, and provides insights into mechanical properties, for example, (i) HB is correlated by QV, σUT by γs or γus, and KIc by γs; (ii) data outliers are identified for Cr (related to τis, γs, QV, and σUT), Be (τis, γsf, γus, and QV), Hf (HB and KIc), Yb (all properties), and Pt (γsf vs. γus); and (iii) τis σit, γsf, γus, γs, QV, and HB are highly correlated to elemental attributes, while σUT, KIc, and especially εEL are less correlated due mainly to experimental uncertainty. In particular, the present data compilation provides a solid foundation to model properties such as γs and τis of multicomponent alloys and τis of unstable structures like bcc Ti, Zr, and Hf. 

Multi-principal-element alloys (MPEAs) based on 3d-transition metals show remarkable mechanical properties. The stacking fault energy (SFE) in face-centered cubic (fcc) alloys is a critical property that controls underlying deformation mechanisms and mechanical response. Here, we present an exhaustive density-functional theory study on refractory- and copper-reinforced Cantor-based systems to ascertain the effects of refractory metal chemistry on SFE. We find that even a small percent change in refractory metal composition significantly changes SFEs, which correlates favorably with features like electronegativity variance, size effect, and heat of fusion. For fcc MPEAs, we also detail the changes in mechanical properties, such as bulk, Young’s, and shear moduli, as well as yield strength. A Labusch-type solute-solution-strengthening model was used to evaluate the temperature-dependent yield strength, which, combined with SFE, provides a design guide for high-performance alloys. We also analyzed the electronic structures of two down-selected alloys to reveal the underlying origin of optimal SFE and strength range in refractory-reinforced fcc MPEAs. These new insights on tuning SFEs and modifying composition-structure-property correlation in refractory- and copper-reinforced MPEAs by chemical disorder, provide a chemical route to tune twinning- and transformation-induced plasticity behavior. 

The atomic structure of FLiNaK and its evolution with temperature are examined with x-ray scattering and molecular dynamics (MD) simulations in the temperature range 460–636 °C. In accord with previous studies, it’s observed that the average nearest-neighbor (NN) cation-anion coordination number increases with increasing cation size, going from ∼4 for Li-F to ∼6.4 for K-F. In addition, we find that there is a coupled change in local coordination geometry – going from tetrahedral for Li-F to octahedral for Na to very disordered quasi-cuboidal for K. The varying geometry and coordination distances for the cation-anion pairs cause a relatively constant F-F next-nearest neighbor (NNN) distance of approximately 3.1 Å. This relatively fixed distance allows the F anions to assume an overall correlated structure very similar to that of a hard-sphere liquid with an extended radius which is beyond the normal F ion size but reflects the cation-anion coordination requirements. Careful consideration of the evolution of the experimental atomic distribution functions with increasing temperature shows that the changes in correlation at each distance can be understood within the context of broadening asymmetric neighbor distributions. Within the temperature range studied, the evolution of F-F correlations with increasing temperature is consistent with changes expected in a hard-sphere liquid simply due to decreasing density. 

Single-phase solid-solution refractory high-entropy alloys (HEAs) show remarkable mechanical properties, such as their high yield strength and substantial softening resistance at elevated temperatures. Hence, the in-depth study of the deformation behavior for body-centered cubic (BCC) refractory HEAs is a critical issue to explore the uncovered/unique deformation mechanisms. We have investigated the elastic and plastic deformation behaviors of a single BCC NbTaTiV refractory HEA at elevated temperatures using integrated experimental efforts and theoretical calculations. The in situ neutron diffraction results reveal a temperature-dependent elastic anisotropic deformation behavior. The single-crystal elastic moduli and macroscopic Young’s, shear, and bulk moduli were determined from the in situ neutron diffraction, showing great agreement with first-principles calculations, machine learning, and resonant ultrasound spectroscopy results. Furthermore, the edge dislocation–dominant plastic deformation behaviors, which are different from conventional BCC alloys, were quantitatively described by the Williamson-Hall plot profile modeling and high-angle annular dark-field scanning transmission electron microscopy.